Don't forget to bundle up!

Quick Order

Smiths 2-Step Knife Sharpener

Smiths 2-Step Knife Sharpener ensures the perfect edge

Smiths 2-Step Knife Sharpener
Price $3.99
Sku # 1-081168
Inventory Status Select a product to view status
 Qty
Share |

 

Related Categories:

Smiths 2-Step Knife Sharpener Product Details

Smith’s 2-Step Knife Sharpener features two tungsten carbide blades with pre-set angles to ensure the perfect edge every time. Three or four strokes through the carbide sharpening slots will restore the edge on a very dull knife. The two crossed ceramic rods also have pre-set angles and provide a smooth finished edge to already sharp knives. It is lightweight, portable, comes with a lanyard hole, and has non-slip rubber feet for added safety. Excellent for use on all types of knives, especially filet knives.


• Crossed Carbide Blades provide Quick Edge setting
• Crossed Ceramic Rods provide a razor Sharp edge
• Preset Sharpening Angles Provide Guaranteed results
• Key Chain for Carrying
Sharpening Instructions:
1. Insert Knife blade into the slot at a 90-Degree Angle to the Sharpener
2. Pull your knife blade straight back towards you while applying light pressure
3. Repeat this action until blade is sharp


Item: Smith’s CCKS/CCKB

Smiths 2-Step Knife Sharpener Videos:

Smiths 2-Step Knife Sharpener Care and Maintenance:

Electric Sharpener:

Caution: Always sharpen your knife blade from the heel to the tip of the blade. Never insert the tip of the knife blade into the blade guide first or push your knife blade through the sharpening slot. This could damage the knife sharpener and/or your knife. Due to some handle designs, you may not be able to sharpen the entire length of the blade using the electric sharpening wheel. We recommend using the manual sharpening slots in these limited cases.


1. Clean all food or dirt off your blade. Never sharpen a dirty knife blade as this could cause the sharpener to malfunction or damage the sharpening wheel.
2. Insert the plug on th end of the power cord into a standard 120 volt electrical outlet. Connect the other end of the power cord into the end of the sharpener.
3. Place the unit on a flat, sturdy surface and turn the unit ON by pressing the vertical ON/OFF switch. you will notice two sharpening slots for electric sharpening, one for each side of your blade. In order to get the best results and to reduce excessive wheel wear, it is important that you do the same number of strokes on each side of your blade. Select the sharpening slot you would like to use first.
4. Hold the knife securely by the handle as you would in normal usage and position the heel of the blade over the selected sharpening slot. While holding the blade parallel to the table, lower the heel of the blade until it contacts the synthetic sharpening wheel. As soon as contact is made and you hear the distinctive grinding sound, pull the blade at a consistent speed though the sharpening slot using light, downward pressure. To sharpen the tip of the blade, lift up on the knife handle slightly as the curved portion of the blade is drawn through the blade guides.
5. Continue alternating passes between the two slots at the recommended speed.

Manual Sharpening Instructions:

Use the manual finishing slot to complete the sharpening process by removing any burrs left on your blade from the sharpening wheel and hone both side of your blade.
1. Hold the blade parallel to the table and center the heel of the blade in the bottom of the crossed ceramic rods.
2. Starting at the heel of the blade, pull the blade through the crossed ceramic rods while applying light, downward pressure (never back and forth). Remember to lift at the end of the stroke to sharpen the tip of your blade.
3. Repeat this process until your blade is razor sharp. Usually 3 or 4 strokes is all it takes.

Care:


o To clean the exterior housing, unplug the unit from the electrical outlet and simply wipe with a damp cloth
o Do not use a powered abrasive cleaner to clean sharpener
o Do not immerse or flush the sharpener with water
o Do not use any lubricant or water to clean the abrasive wheel
o Do not use a lubricant on any other component

Review Summary

Customer Reviews

No Reviews